Shark Vacuum Filters

Shark vacuums typically use washable foam and felt pre-motor filters plus a HEPA post-motor filter. Shark generally advises rinsing the foam and felt filters monthly and cleaning or replacing the HEPA filter about once a year.

What to look for: Shark Vacuum Filters

• Pre-motor filters: foam and felt; rinse monthly.
• HEPA filter: clean or replace about yearly.
• Drying: air dry at least 24 hours.
• Model match: Navigator, Rotator, Stratos and cordless filters differ.
• Kits: filter kits often include both types.
• Genuine parts: maintain the Anti-Allergen seal.
• Washing: water only, no detergent; never run without filters fitted.

Compare with Dyson Vacuum Filters and Bissell Vacuum Filters, or browse all Vacuum Filters. Each product page lists the exact model number and what comes in the box.

FAQs

How often should I clean Shark vacuum filters?

Shark generally advises rinsing foam and felt pre-motor filters about once a month and cleaning or replacing the HEPA post-motor filter about once a year. Air dry for at least 24 hours before reinstalling. Check your manual for your exact model.

Can I wash a Shark HEPA filter?

Many Shark HEPA filters can be rinsed with water and air dried, but check your model's manual. Never use detergent, and ensure the filter is completely dry before reinstalling to avoid damage or odors. Let it air dry for at least 24 hours, away from direct heat.

Which filter fits my Shark vacuum?

Find the model number on the vacuum's label, usually on the back or underside. Shark filters are listed by compatible model numbers. Buy the kit that lists your exact model, since filters vary across Navigator, Rotator, Stratos and cordless lines.